Polythene Roll

Polythene Roll

Falcon Link TR stocks a comprehensive range of polythene rolls - polyethylene (PE) film rolls - for construction, packaging, and industrial applications in the UAE. polythene rolls are widely used as dust covers, moisture barriers, surface protection on construction sites, and for wrapping goods during transit. Available in various widths, thicknesses, and roll weights.

Key Features

1000G (250 micron) and 2000G (500 micron) — standard UAE DPM specifications
Clear and black options — stocked in widths up to 4m
UV-stabilised grade for outdoor and agricultural use in UAE climate
High tensile strength — resists puncture during rebar placement and concrete pouring
Lightweight and easy to unroll — 2-person installation on large floor plates
Rolls in 25m, 50m, and 100m lengths to minimise site joints
Competitive wholesale pricing with same-day delivery across UAE

Applications

Construction site dust and moisture coversFurniture and equipment wrappingSoil moisture retention in agricultureWarehouse flooring protectionCold storage and freezer lining

What Gauge Polythene Is Required as Damp-Proof Membrane Under UAE Concrete Slabs?

1000 gauge (250 micron) polythene is the minimum standard for damp-proof membrane (DPM) beneath concrete ground floor slabs in UAE construction. This specification meets most UAE municipality and engineering consultant requirements for residential and commercial ground floors. In areas with high groundwater tables, aggressive saline soils, or near-coastal sites in Dubai and Abu Dhabi where salt-water migration is a risk, structural engineers often specify 1200G (300 micron) or 2000G (500 micron) for additional protection. The DPM must be lapped 300mm at joints and turned up at edges to form a continuous barrier.

What Is the Difference Between 1000G and 2000G Polythene?

Gauge is a direct measure of polythene sheet thickness. 1000 gauge = 250 microns (0.25mm). 2000 gauge = 500 microns (0.5mm) — twice as thick. The thicker 2000G is stronger, harder to puncture by sharp aggregate or rebar ends during concrete pouring, and better suited for demanding applications including underground waterproofing membranes, pond and irrigation reservoir liners, and temporary roof covers on partially built structures. For standard ground floor DPM on residential projects, 1000G is adequate; for commercial construction with heavy slab reinforcement, 1200G or 2000G reduces the risk of puncture before concrete is placed.

Should I Use Clear or Black Polythene for UAE Construction and Agricultural Use?

Clear polythene allows light transmission — used in greenhouse covers, seedling propagation tunnels, and applications where solar heat gain is useful for plant growth. It is also used for site protection where visibility through the sheet is needed. Black polythene blocks light completely — used for weed suppression, ground mulch film, and any application where UV penetration or light would encourage biological growth. For DPM beneath concrete slabs, either colour works as a moisture barrier; black is more commonly seen in UAE construction as it is easier for inspectors to see the membrane is in place during pour preparation.

How to Order Polythene Rolls in UAE

Contact our Sharjah team with the gauge (1000G or 2000G), colour (clear or black), width, and length or area needed. We can advise on the quantity required for your project based on floor area and DPM specification. Delivery to UAE construction sites available same-day for orders placed before noon. Wholesale pricing for orders above 5 rolls.

Frequently Asked Questions

What gauge polythene roll is needed for damp-proof membrane in UAE construction?

1000 gauge (250 micron) polythene is the standard minimum for DPM beneath concrete ground floor slabs in UAE construction and meets most municipality specifications. For sites with high groundwater, saline soils, or coastal locations, upgrade to 1200G or 2000G (500 micron) for additional protection against puncture during rebar placement and concrete pouring.

What is the difference between 1000 gauge and 2000 gauge polythene?

1000 gauge = 250 microns (0.25mm thick). 2000 gauge = 500 microns (0.5mm thick) — twice the thickness, significantly more puncture-resistant. Use 1000G for standard residential DPM and light site protection. Use 2000G for commercial DPM with heavy reinforcement, underground waterproofing, pond liners, and any application where puncture risk is higher.

Do you supply UV-stabilised polythene for outdoor use in UAE?

Yes. Standard LDPE polythene degrades quickly under UAE's intense UV radiation — typically within 4–8 weeks of continuous outdoor exposure. UV-stabilised polythene contains UV inhibitors that extend outdoor service life to 12–24 months. This is essential for greenhouse covers, agricultural mulch film, and any outdoor application that needs to last through a UAE summer.

What roll widths and lengths do you stock for polythene rolls?

Standard stock widths: 2m, 3m, and 4m. Standard lengths: 25m, 50m, and 100m rolls. Folded polythene rolls (where wider coverage is unfolded on site) are also available. For applications needing non-standard sizes, contact our Sharjah team — we can source specific dimensions with a short lead time.

Can polythene roll be used as a vapour barrier in UAE wall construction?

Yes. Polythene sheet is used as a vapour control layer in cold storage rooms, insulated panel walls, and building envelopes where moisture migration must be controlled. In UAE construction, where the outside is hot and humid while the inside is air-conditioned and cool, vapour barriers are critical to prevent interstitial condensation within wall assemblies. The polythene should be installed on the warm (exterior) side of the insulation.

Do you supply polythene for greenhouse and agricultural use in UAE?

Yes. UV-stabilised clear polythene film is used by UAE and GCC greenhouse operators for tunnel covers, seedling propagation, and drip irrigation channel liners. Black polythene mulch film suppresses weeds and retains soil moisture in UAE market garden applications. We supply both in standard widths and lengths suitable for greenhouse and agricultural use. Contact us for project quantities and pricing.

Can you deliver polythene rolls to a construction site in Dubai on the same day?

Yes — for orders placed before noon, same-day delivery from our Sharjah warehouse to Dubai construction sites is available. For large project requirements, we can arrange scheduled deliveries to match your concrete pour programme, ensuring DPM is on site when the laying team needs it.

Ready to Order? Get a Free Quote Today

Contact our team for competitive pricing, custom orders, and fast UAE-wide delivery.

WhatsApp Us+971566900457info@falconlinktr.com